Horizontal slurry pumps
One of the most known and most important pump used for the processing of minerals is abundantly, is the Horizontal fluid pump. This type of pump is installed dry and the wet end is always closed, in fact, in the design of the horizontal fluid pumps of the bearing And the drive are embedded outside the pump slurry.
For this reason, it is very important that the pump chamber is always dry and there is no moisture and fluid in the chamber. Therefore, the pump is always installed separately from the compartment and in a separate space.
In order to use a Horizontal slurry pump with a wet end and a bearing for dredging operations or use in wet and dry environments, some instructions and rules regarding sealing and special sealing bearings should be made to prevent damage to the pump.
Horizontal slurry pumps work using a shaft type that performs antifriction bearing that supported pumps Impellers. Lubrication of bearings is done using oil or grease. In most horizontal slurry pumps, the propeller is fitted below or under the shaft. The drive axle is installed using a belt buckle with a flexible coupling in place and used mainly by a grid, although some of them also lack the gearbox.
Usually in horizontal slurry pumps which start from the endurance wet end bearing to the center of the propeller center, the shaft diameter is in the axle seal D (mm), the length of the cover, or L (mm), and the main factor of the shaft or SFF is the flexural force It calls the SFF that is defined by L3 / D4. The quality of the seal and the useful life of the pump are heavily dependent on the degree of sensitivity to shaft deflection. SFF values are usually used for horizontal fluid pumps 0.2-0.75.
Horizontal Pump types
- Type XM = A heavy horizontal slurry pump for transferring heavy liquids with additional metal parts
- Type XR = A heavy horizontal slurry pump for heavy liquids using an additional coating of resistant rubber parts
- Type HM = Horizontal slurry pump called heavy duty pump with metal parts screed
- Type HR = Horizontal slurry pump as a heavy duty pump with an additional rubber parts coating
- Type HG = Horizontal slurry pump defined as heavy Gravel pump
- Type HP = Horizontal slurry pump with very high pressure and super high capacity
- Type HT = Special Horizontal slurry Pump for Heavy Tunneling
- Type MM = Horizontal slurry pumps known as mining pumps and covered with additional metal parts
- Type MR = Mineral horizontal slurry pump coated with additional rubber parts.
Many diesel pumps in the market are currently being developed in different designs and spectra by using different rubber and metal parts in the Zimaxon Industrial Group, which are considered as a abrasive pump and as a horizontal slurry pump for heavy activities such as HM or HR, or special mine operations called MR or MM, are very functional and of high quality.
The characteristics of these pumps include:
- Having a long life
- Use of rubber or metal coatings that are highly resistant to corrosion and wear in their coating
- Use of more resistant and thicker coatings in areas where there is a higher risk of wear
- Use of high elastomeric property against wear in known areas
- Ability to change rubber and metal parts and adapt them to different applications
- Possibility to add some materials or optional parts to the customer’s order to the pump
Precision selection with the highest quality and performance of parts and type of pump cover - For use in different areas and applications with different wear rates and different environmental conditions.
- Possibility of dual composite settings to create better abrasion resistance
- Ability to localize the pump for specific applications
- Very suitable for minerals extraction activity
- Highly resistant to abrasive fluids
- For reloading tasks, the pumps equipped SAG and AG pumps
- Uses silicone feed
- Suitable for waste and mining purposes
- Usability for different industrial processes
- Safe use for coal ash and power plant
- used for pumping sand
- Suitable for pumping abrasive waste in mines
- Ability to be used as a fluid pump in the factory
- Applicable to the pallet and paper industry
- Suitable for pumping lime fertilizers
- Applicable to alumina
- Suitable for fertilizer
- Possibility of transferring acidic and chemical substances without fear of damage to the pump